90425 is primarily used as an accoustical noise barrier in off-highway transportation markets. Its toughness and surface finish make it ideal for wear surface/floor mat applications. The high basis weight helps block sound and allows it to act as a mass damper to attenuate structure-borne noise.
Product Construction
Polyvinyl Chloride
Typical Properties*
Property
Test Method
Value
Basis Weight
N/A
1.0lb/ft2 +/- 10%
Tensile Strength
MD
ASTM D 412 Die A
1500 psi min
XMD
ASTM D 412 Die A
1200 psi min
Ultimate Elongation
MD
ASTM D 412 Die A
225% min
XMD
ASTM D 412 Die A
225% min
Tear Strength
MD
ASTM D 624 Die C
229 psi min
XMD
ASTM D 624 Die C
229 psi min
Cold Flexibility
-20oF, 1"x10" on 1" Mandrel
Compliant
Fogging
SAEJ1756
60 units min
Flammability
FMVSS302
Complilant
Embossing Pattern
N/A
Specified per Order:
Lava Twist or Matte
*Note: The properties given above are based on the material in its non-embossed state.
The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (09/12/07)
