|
 |
|
|
| |
 |
|
| |
|
|
Material Number |
 |
29001 |
 |
Description |
|
2# Crosslinked Polyethylene |
|
Applications |
|
Federal Foam 29001 is soft, aestetically pleasing materials offering superior flexibility,
elasticity and resiliency. They exhibit exceptional mechanical strength and durability.
These materials can be cut, slit, die cut, skived, sewn, embossed, winyl dipped and
adhesive coated and are ideal for heat and adhesive lamination to a variety of materials
including metals, plastic films and most textiles. They are popular materials for use in
the sports, marine and decorative packaging industries. |
| |
|
|
|
Typical Physical
Properties |
|
| |
Property |
Test Method |
Value |
| |
Density |
ASTM D 3575 |
2.0 +/- 0.5 lb/ft3 |
| |
25% Compressive Strength |
ASTM D 3575 |
5 to 8 psi |
| |
50% Compression Set |
ASTM D 3575 |
40% max |
| |
Tensile Strength |
ASTM D 3575 |
25 psi min |
| |
Elongation |
ASTM D 3575 |
120% min |
| |
Thermal Conductivity |
ASTM D 3575 |
0.24 to 0.30 BTU-in/hr-ft2 |
| |
Water Absortion |
ASTM D 3575 |
0.1 lb/ft2 max |
| |
Flammability |
FMVSS302 |
Certified |
| |
Recommended Temp Range |
|
|
| |
|
|
|
| |
|
 |
| The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (06/5/06) |
| |
|
|
| |
|
|
|
|
 |
|
