Federal Foam Technologies - Matting Material

Material Number

20076

Description

General Purpose Masticated Rubber

Applications

Federal Foam Technologies' 20076 is a flexible, fiber-reinforced masticated thermoset
rubber. It is based on NR and SBR compounds and should be used in areas where the
service temperature does not exceed 212^o

Product Construction

43% post-consumer recycled tire-derivative

40% post-industrial recycled tire plant scrap

Typical Physical
Properties

Property		Test Method	Value
Tensile Strength	WMD	ASTM D 412, Die C	696.2 psi minimum
	AMD	ASTM D 412, Die C	362.6 psi minimum

Tear Strength	WMD	ASTM D 624, Die B	119.9 lb/in minimum
	AMD	ASTM D 624, Die B	251.2 lb/in minimum

Elongation	WMD	ASTM D 412, Die C	15% minimum
	AMD	ASTM D 412, Die C	40% minimum

Hardness, Shore A		ASTM D 297, Method A	80 +/- 5

Flammability		FMVSS302	Compliant

Low Temperature Resistance		ASTM D 2137 @ -40^oC	Non-brittle

WMD = With Machine Direction AMD = Across Machine Direction

The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (12/9/03)