Federal Foam Technologies - Matting Material

Material Number

19500 (2C1)

Description

2C1 Vinyl/Nitrile Blend

Applications

19500 is a black, light density, closed-cell elastomeric product with low oil-swell
properties. It is designed to perform where an inexpensive gasket or stripping material is
required. This product is ideally suited for noise damping, vibration damping, gasket and
sealing applications in automotive or similar markets.

Product Construction

PVC/NBR - Polyvinyl Chloride/Nitrile Butadiene Rubber

Typical Physical
Properties

Property	Test Method	Value
Classification	ASTM D 1056	2C1
Density	ASTM D 1056	4.0 to 5.5 pcf
25% Compression Deflection	ASTM D 1056	2 to 3.5 psi
50% Compression Set	ASTM D 1056	25% max
Tensile Strength	ASTM D 412	40 psi min
Elongation	ASTM D 412	150% min
Water Absortion	ASTM D 1056	5% max
Fluid Immersion	ASTM D 1056	150% max
Flammability	UL94 HF-1	Certified @ 2.9 mm to 7.1 mm
	UL94 HBF	Certified @ 7.1 mm
	FMVSS302	Compliant
Recommended Temp Range	N/A	-40^oF to 200^oF
Electrical Conductivity

The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (01/14/05)