Federal Foam Technologies - Matting Material

Material Number

19001 (2C1)

Description

2C1 Vinyl/Nitrile Blend

Applications

This material is a black vinyl nitrile product especially designed to perform where an
inexpensive gasket or stripping material is required. This product is ideally suited for
vibration isolation and damping, cushioning and padding, gasketing and sealing, and shock
absorption. Other applications include: athletic padding, wet suits, toys, flotation material
and stadium cushions.

Product Construction

PVC/NBR - Polyvinyl Chloride/Nitrile Butadiene Rubber

Typical Physical
Properties

Property	Test Method	Value
Classification	ASTM D 1056	2C1
Density	ASTM D 1056	3.5 to 5.0 pcf
25% Compression Deflection	ASTM D 1056	2 to 4 psi
50% Compression Set	ASTM D 1056	40% max
Tensile Strength	ASTM D 412	40 psi min
Elongation	ASTM D 412	100% min
Water Absortion	ASTM D 1056	7% max
Fluid Immersion	ASTM D 1056	125% max
Flammability	UL94 HF-1	Listed @ 3.68 mm
	UL94 V-0, 5VA
	FMVSS302	Compliant
Recommended Temp Range	N/A	-40^oF to 200^oF
Electrical Conductivity

The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (01/20/04)