18475 is a high strength acrylic adhesive, suitable for bonding to most surfaces, including
low energy plastics. It has good shear holding power at evaluated temperatures. This
product is suitable for fabricated foam parts bonded to contour surfaces, plastic
nameplates and/or graphic overlays bonded to low surface energy (LSE) plastics.
Product Construction
Thickness
Adhesives
0.0040" (102 µm)
Acrylic Based
Liner
0.0072” (183 µm)
96# White Polycoated Kraft
Typical Physical
Properties
Property
Test Method
Value
Adhesion*
Stainless Steel
20 Min Room
Temp Dwell
48 oz/in (523 N/m)
Stainless Steel
72 Hour Dwell
87 oz/in (949 N/m)
Stainless Steel
Ultimate Bond
138 oz/in (1505 N/m)
Polycarbonate
72 Hour Dwell
70 oz/in (764 N/m)
Polycarbonate
Ultimate Bond
34 oz/in (371 N/m)
Polypropylene
72 Hour Dwell
44 oz/in (480 N/m)
Polypropylene
Ultimate Bond
40 oz/in (436 M/n)
Service Temperature
Intermittent
N/A
-40oF to 250oF (-40oC to 121oC)
Min. Application Temp.
N/A
50oF (10oC)
*All adhesion properties used a modified version of ASTM D-3330 as follows: 90 degree peel, 12 in./min. (305/mm/min) 2 mil (0.051 mm) aluminum foil
The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (12/22/05)
