18400 is designed for use in applications requiring lamination to polyether and polyester
urethane foams. The heavy mass of adhesive provides excellent initial tack and adhesion
and should be considered for applications where a textured substrate is involved.
Product Construction
Thickness
Adhesives
0.0051" (130 µm)
Acrylic Based
Liner
0.0046” (117 µm)
80# Densified Kraft
Typical Physical
Properties
Property
Test Method
Value
Adhesion (180O Peel*) Stainless Steel
PSTC - 3
ASTM D 3330
125 oz/in (1368 N/m)
* 2 Mil PET support, 1 minute dwell, 12 in/min
Static Sheer 1 in2, 5.5# load
PSTC-7
>400 minutes to failure
Service Temperature (max)
Continuous
N/A
200oF (93oC)
Intermittent
N/A
250oF (121oC)
Min. Application Temperature
N/A
50º F (10º C)
The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (10/02/06)
