18000 is designed for bonding to a wide variety of plastic, metal and foam substrates
where resistance to plasticizers and high temperatures is required.
Product Construction
Thickness
Adhesives
0.0018" (46 µm)
Acrylic Based
Carrier
0.0005" (13 µm)
Polyester Film
Adhesives
0.0018" (46 µm)
Acrylic Based
Liner
0.0043” (109 µm)
80# Densified Kraft
Typical Physical
Properties
Property
Test Method
Value
Adhesion (180O Peel*) Stainless Steel
PSTC - 3
55 oz/in (600 N/m)
* 2 Mil PET support, 1 minute dwell, 12 in/min
Loop Tack Stainless Steel
Fasson TM-7A
55 oz/in (600 N/m)
Static Sheer 1 in2, 5.5# load
PSTC-7
>600 minutes
Service Temperature (max)
Continuous
N/A
225oF (107oC)
Intermittent
N/A
300oF (149oC)
Min. Application Temperature
N/A
50º F (10º C)
Note: Adhesion, Loop Tack and Static Shear values given apply to the liner side and unwind side.
The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (12/05/03)
