Federal Foam Technologies - Matting Material

Material Number

10410 (1A0)

Description

1A0 Crushed Cell Vinyl/Nitrile Blend

Applications

Federal Foam Technologies' 10410 is crushed cell foam that works well in gasket
applications where conforming to irregular surfaces is required and when easy
compressibility is a necessity. When compressed to 50% of its original thickness, the
material will form a watertight seal. This material is typically used for mirror gaskets,
window gaskets, hood gaskets and between sheet metal panels in the HVAC industry.

Product Construction

PVC/NBR - Polyvinyl Chloride/Nitrile Butadiene Rubber

Certified Physical
Properties

Property	Test Method	Value
25% Compression Deflection	ASTM D 1056	0.4 psi max
75% Compression Deflection	ASTM D 1056	1.0 psi max

Typical Physical
Properties

Property	Test Method	Value
Classification	ASTM D 1056	1A0
Density	ASTM D 1056	3.5 to 5.5 pcf
25% Compression Deflection
50% Compression Set	ASTM D 1056	5% max
Tensile Strength	ASTM D 412	20 psi min
Elongation	ASTM D 412	100% min
Water Absortion
Fluid Immersion
Flammability	FMVSS302	Compliant
	UL94 HF-1
	UL94 V-0, 5VA
Recommended Temp Range	N/A	-40^oF to 200^oF
Electrical Conductivity

The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (01/19/06)