Federal Foam Technologies - Matting Material

Material Number

10300 (2B3)

Description

2B3 Neoprene/Vinyl/Nitrile Blend

Applications

10300 is a black, light density, closed-cell elastomeric product especially designed to
perform where an inexpensive gasket or stripping material is required. 10300 is an efficient
thermal insulator and can be used where there are no specific requirements for flame
resistance or smoke generation. This product is ideally suited for vibration isolation and
damping, cushioning and padding, gasketing and sealing, and shock absorption.

Product Construction

CR/PVC/NBR - Neoprene/Polyvinyl Chloride/Nitrile Butadiene Rubber

Typical Physical
Properties

Property	Test Method	Value
Classification	ASTM D 1056	2B3
Density	ASTM D 1056	7.0 to 9.5 pcf
25% Compression Deflection	ASTM D 1056	9 to 13 psi
50% Compression Set	ASTM D 1056	35% max
Tensile Strength	ASTM D 412	100 psi min
Elongation	ASTM D 412	100% min
Water Absortion	ASTM D 1056	10% max
Fluid Immersion	ASTM D 1056	100% max
Flammability	UL94 HF-1	Certified @ 3.0 mm
	UL94 V-0, 5VA	Certified @ 6.0 mm
	FMVSS302	Compliant
Recommended Temp Range	N/A	-40^oF to 200^oF
Electrical Conductivity	N/A	Non-conductive

The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (12/2/03)