Material Number |
 |
10100 (2B1) |
 |
Description |
|
2B1 Neoprene/Vinyl/Nitrile Blend |
|
Applications |
|
10100 is a black, light density, closed-cell elastomeric product especially designed to
perform where an inexpensive gasket or stripping material is required. This product is
ideally suited for vibration isolation and damping, cushioning and padding, gasketing and
sealing, and shock absorption. Other applications include: athletic padding, wet suits,
mats, toys, flotation material and stadium cushions |
|
Product Construction |
|
| CR/PVC/NBR - Neoprene/Polyvinyl Chloride/Nitrile Butadiene Rubber |
| |
|
|
Typical Physical
Properties |
|
| |
Property |
Test Method |
Value |
| |
Classification |
ASTM D 1056 |
2B1 |
| |
Density |
ASTM D 1056 |
3.5 to 6.0 pcf |
| |
25% Compression Deflection |
ASTM D 1056 |
2 to 5 psi |
| |
50% Compression Set |
ASTM D 1056 |
30% max |
| |
Tensile Strength |
ASTM D 412 |
50 psi min |
| |
Elongation |
ASTM D 412 |
75% min |
| |
Water Absortion |
ASTM D 1056 |
10% max |
| |
Fluid Immersion |
ASTM D 1056 |
250% max |
| |
Flammability |
UL94 HF-1 |
Certified @ 3 mm |
| |
|
UL94 V-0, 5VA |
Certified @ 6 mm |
| |
|
FMVSS302 |
Compliant |
| |
Recommended Temp Range |
N/A |
-40oF to 200oF |
| |
Electrical Conductivity |
N/A |
Non-conductive |
| |
|
|
|
| |
|
 |
| The data, including flammability ratings, presented in this Material Specification Sheet is for reference only and reflects typical properties and characteristics obtained under controlled test conditions. FFT excludes any expressed or implied warranties of fitness for a particular application or purpose. The user has the responsibility to determine fitness for use and assumes all risk and liability for that particular application. The data reflected in this bulletin is subject to change. Please contact FFT to verify current status. (05/10/04) |
| |
|
|
| |
|
|
